MACD底背離低位金叉量柱公式源碼[同花順公式]
MACD底背離低位金叉量柱公式源碼:
DIFF:EMA(C,9)-EMA(C,17);
DEA:EMA(DIFF,8),COLOrffaa00;
MACD:=2*(DIFF-DEA);//www.kzuj.com.cn
STICKLINE(MACD>=0,MACD,0,4,1),COLORF00FF0;
STICKLINE(MACD<0,MACD,0,4,1),colorwhite;
STICKLINE(MACD<REF(MACD,1)AND MACD>0,0,MACD,4,0 ),COLOR00aaff;
X1:IF(diff<0,diff,0),COLOR0000FF,LINETHICK2;
X2:IF(diff<0,0,diff),colormagenta,LINETHICK1;
X3:IF(diff<dea,diff,dea),COLOR00ff00,linethick1;
X4:IF(diff>dea,dea,dea),linethick1,COLORffbb11;
低位金叉:=CROSS(DIFF,DEA) AND DIFF<-0.1;
DRAWTEXT(低位金叉,dea*0.86,' 金叉'),coloryellow;
STICKLINE(低位金叉,DEA*0.86,DEA*0.66,6,0),coloryellow;
JCCOUNT:=COUNT(CROSS(DIFF,DEA),BARSLAST(DEA>=0));
二次金叉:=CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=2,21)=1;
STICKLINE(二次金叉,DEA*0.96,DEA*0.76,6,0),ColorFF00FF;
DRAWICON(二次金叉,dea*1.1,'BUY') ;
DRAWTEXT(二次金叉,DEA*0.96,' 金叉'),ColorFF00FF;
A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));
底背離:=REF(C,A1+1)>C AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA);
STICKLINE(底背離,DEA*1.09,DEA*0.86,6,0),Color00FF00;
DRAWLINE(A1=0,DEA,底背離,DEA,0),colorred,linethick1;
DRAWTEXT(底背離,DEA*1.09,' 底背'),Color6600FF;
A2:=BARSLAST(REF(CROSS(DEA,DIFF),1));
頂背離:=REF(C,A2+1)<C AND REF(DIFF,A2+1)>DIFF AND CROSS(DEA,DIFF);
DRAWLINE(A2=0,DEA,頂背離,DEA,0),colorgreen,linethick1;
DRAWTEXT(頂背離,DEA*1.2,' 頂背'),Color00FF00;
STICKLINE(MACD>0 AND MACD>=REF(MACD,1),0,MACD,6,0),color0000ff;
STICKLINE(MACD>0 AND MACD<REF(MACD,1),0,MACD,6,0),colorffff00;
STICKLINE(MACD<0 AND MACD>=REF(MACD,1),0,MACD,6,0),colorff00ff;
STICKLINE(MACD<0 AND MACD<REF(MACD,1),0,MACD,6,0),color00ff00;
Zero : 0;//www.kzuj.com.cn
cxh1=HHV(cxh1,20);
多轉空:=((((LLV(MACD,4)>0) AND (MACD<REF(MACD,1))) AND (REF(MACD,1)>REF(MACD,2))) AND (REF(MACD,2)>REF(MACD,3)));
空轉多:=((((HHV(MACD,4)<0) AND (MACD>REF(MACD,1))) AND (REF(MACD,1)<REF(MACD,2))) AND (REF(MACD,2)<REF(MACD,3)));
DRAWICON(多轉空,MACD,2);
DRAWICON(空轉多,MACD,1);
DIF:=EMA(C,9)-EMA(C,17);
DEA:=EMA(DIF,8);
MACD:=(DIF-DEA)*2,COLORSTICK;
第一紅柱:CROSS(DIF,DEA);
MTM:=C-REF(CLOSE,1);
DX:=100*EMA(EMA(MTM,6),6)/EMA(EMA(ABS(MTM),6),6);
YXF:=IF(LLV(DX,2)=LLV(DX,7) AND COUNT(DX<0,2) AND CROSS(DX,MA(DX,2)),1,0);
藍:IF(FILTER(YXF=1,5),20,0),colorliblue,LINETHICK3;
紅: IF(FILTER(YXF=1,5),10,0),colorred,LINETHICK2;
黃: IF(FILTER(YXF=1,5),5,0),coloryellow,LINETHICK1;
?
同花順公式MACD背離量柱
使用方法：0軸上方出現紅色柱子，是做多信號。0軸上方出現青藍色柱子是減倉信號。0軸下方出現綠色柱子是做空信號，0軸下方出現洋紅色柱子是空頭回補信號。
?
?
公式導入教程: 【通達信公式源碼導入方法教程】 【同花順公式源碼導入方法教程】 【大智慧新一代公式源碼導入方法教程】
?
有思路，想編寫各種指標公式，交易模型，選股公式，還原公式的朋友
可聯系技術人員 QQ: 262069696 或微信：cxhjy888 進行 有償收費 編寫！(注：由于人數限制，QQ或微信請選擇方便的一個聯系我們就行，加好友時請簡單備注下您的需求，否則無法通過。謝謝您！)
(注：由于人數限制，QQ或微信請選擇方便的一個聯系我們就行，加好友時請簡單備注下您的需求，否則無法通過。謝謝您！)
相關文章
-
沒有相關內容